Slang Target Compatibility
Shader Model (SM) numbers are D3D Shader Model versions, unless explicitly stated otherwise. OpenGL compatibility is not listed here, because OpenGL isn’t an officially supported target.
Items with a + means that the feature is anticipated to be added in the future. Items with ^ means there is some discussion about support later in the document for this target.
| Feature | D3D11 | D3D12 | VK | CUDA | CPU |
|---|---|---|---|---|---|
| Half Type | No | Yes ^ | Yes | Yes ^ | No + |
| Double Type | Yes | Yes | Yes | Yes | Yes |
| Double Intrinsics | No | Limited + | Limited | Most | Yes |
| u/int8_t Type | No | No | Yes ^ | Yes | Yes |
| u/int16_t Type | No | Yes ^ | Yes ^ | Yes | Yes |
| u/int64_t Type | No | Yes ^ | Yes | Yes | Yes |
| u/int64_t Intrinsics | No | No | Yes | Yes | Yes |
| int matrix | Yes | Yes | No + | Yes | Yes |
| tex.GetDimensions | Yes | Yes | Yes | No | Yes |
| SM6.0 Wave Intrinsics | No | Yes | Partial | Yes ^ | No |
| SM6.0 Quad Intrinsics | No | Yes | No + | No | No |
| SM6.5 Wave Intrinsics | No | Yes ^ | No + | Yes ^ | No |
| WaveMask Intrinsics | Yes ^ | Yes ^ | Yes + | Yes | No |
| WaveShuffle | No | Limited ^ | Yes | Yes | No |
| Tesselation | Yes ^ | Yes ^ | No + | No | No |
| Graphics Pipeline | Yes | Yes | Yes | No | No |
| Ray Tracing DXR 1.0 | No | Yes ^ | Yes ^ | No | No |
| Ray Tracing DXR 1.1 | No | Yes | No + | No | No |
| Native Bindless | No | No | No | Yes | Yes |
| Buffer bounds | Yes | Yes | Yes | Limited ^ | Limited ^ |
| Resource bounds | Yes | Yes | Yes | Yes (optional) | Yes |
| Atomics | Yes | Yes | Yes | Yes | Yes |
| Group shared mem/Barriers | Yes | Yes | Yes | Yes | No + |
| TextureArray.Sample float | Yes | Yes | Yes | No | Yes |
| Separate Sampler | Yes | Yes | Yes | No | Yes |
| tex.Load | Yes | Yes | Yes | Limited ^ | Yes |
| Full bool | Yes | Yes | Yes | No | Yes ^ |
| Mesh Shader | No | Yes | Yes | No | No |
[[unroll]](#unroll] |
Yes | Yes | Yes ^ | Yes | Limited + |
| Atomics | Yes | Yes | Yes | Yes | No + |
| Atomics on RWBuffer | Yes | Yes | Yes | No | No + |
| Sampler Feedback | No | Yes | No + | No | Yes ^ |
| RWByteAddressBuffer Atomic | No | Yes ^ | Yes ^ | Yes | No + |
| Shader Execution Reordering | No | Yes ^ | Yes ^ | No | No |
| debugBreak | No | No | Yes | Yes | Yes |
| realtime clock | No | Yes ^ | Yes | Yes | No |
Half Type
There appears to be a problem writing to a StructuredBuffer containing half on D3D12. D3D12 also appears to have problems doing calculations with half.
In order for half to work in CUDA, NVRTC must be able to include cuda_fp16.h and related files. Please read the CUDA target documentation for more details.
u/int8_t Type
Not currently supported in D3D11/D3D12 because not supported in HLSL/DXIL/DXBC.
Supported in Vulkan via the extensions GL_EXT_shader_explicit_arithmetic_types and GL_EXT_shader_8bit_storage.
u/int16_t Type
Requires SM6.2 which requires DXIL and therefore DXC and D3D12. For DXC this is discussed here.
Supported in Vulkan via the extensions GL_EXT_shader_explicit_arithmetic_types and GL_EXT_shader_16bit_storage.
u/int64_t Type
Requires SM6.0 which requires DXIL for D3D12. Therefore not available with DXBC on D3D11 or D3D12.
int matrix
Means can use matrix types containing integer types.
tex.GetDimensions
tex.GetDimensions is the GetDimensions method on ‘texture’ objects. This is not supported on CUDA as CUDA has no equivalent functionality to get these values. GetDimensions work on Buffer resource types on CUDA.
SM6.0 Wave Intrinsics
CUDA has premliminary support for Wave Intrinsics, introduced in PR #1352. Slang synthesizes the ‘WaveMask’ based on program flow and the implied ‘programmer view’ of exectution. This support is built on top of WaveMask intrinsics with Wave Intrinsics being replaced with WaveMask Intrinsic calls with Slang generating the code to calculate the appropriate WaveMasks.
Please read PR #1352 for a better description of the status.
SM6.5 Wave Intrinsics
SM6.5 Wave Intrinsics are supported, but requires a downstream DXC compiler that supports SM6.5. As it stands the DXC shipping with windows does not.
WaveMask Intrinsics
In order to map better to the CUDA sync/mask model Slang supports ‘WaveMask’ intrinsics. They operate in broadly the same way as the Wave intrinsics, but require the programmer to specify the lanes that are involved. To write code that uses wave intrinsics acrosss targets including CUDA, currently the WaveMask intrinsics must be used. For this to work, the masks passed to the WaveMask functions should exactly match the ‘Active lanes’ concept that HLSL uses, otherwise the result is undefined.
The WaveMask intrinsics are not part of HLSL and are only available on Slang.
WaveShuffle
WaveShuffle and WaveBroadcastLaneAt are Slang specific intrinsic additions to expand the options available around WaveReadLaneAt.
To be clear this means they will not compile directly on ‘standard’ HLSL compilers such as dxc, but Slang HLSL output (which will not contain these intrinsics) can (and typically is) compiled via dxc.
The difference between them can be summarized as follows
- WaveBroadcastLaneAt - laneId must be a compile time constant
- WaveReadLaneAt - laneId can be dynamic but MUST be the same value across the Wave ie ‘dynamically uniform’ across the Wave
- WaveShuffle - laneId can be truly dynamic (NOTE! That it is not strictly truly available currently on all targets, specifically HLSL)
Other than the different restrictions on laneId they act identically to WaveReadLaneAt.
WaveBroadcastLaneAt and WaveReadLaneAt will work on all targets that support wave intrinsics, with the only current restriction being that on GLSL targets, only scalars and vectors are supported.
WaveShuffle will always work on CUDA/Vulkan.
On HLSL based targets currently WaveShuffle will be converted into WaveReadLaneAt. Strictly speaking this means it requires the laneId to be dynamically uniform across the Wave. In practice some hardware supports the loosened usage, and others does not. In the future this may be fixed in Slang and/or HLSL to work across all hardware. For now if you use WaveShuffle on HLSL based targets it will be necessary to confirm that WaveReadLaneAt has the loosened behavior for all the hardware intended. If target hardware does not support the loosened restrictions it’s behavior is undefined.
Tesselation
Although tesselation stages should work on D3D11 and D3D12 they are not tested within our test framework, and may have problems.
Native Bindless
Bindless is possible on targets that support it - but is not the default behavior for those targets, and typically require significant effort in Slang code.
‘Native Bindless’ targets use a form of ‘bindless’ for all targets. On CUDA this requires the target to use ‘texture object’ style binding and for the device to have ‘compute capability 3.0’ or higher.
Resource bounds
For CUDA this is optional as can be controlled via the SLANG_CUDA_BOUNDARY_MODE macro in the slang-cuda-prelude.h. By default it’s behavior is cudaBoundaryModeZero.
Buffer Bounds
This is the feature when accessing outside of the bounds of a Buffer there is well defined behavior - on read returning all 0s, and on write, the write being ignored.
On CPU there is only bounds checking on debug compilation of C++ code. This will assert if the access is out of range.
On CUDA out of bounds accesses default to element 0 (!). The behavior can be controlled via the SLANG_CUDA_BOUND_CHECK macro in the slang-cuda-prelude.h. This behavior may seem a little strange - and it requires a buffer that has at least one member to not do something nasty. It is really a ‘least worst’ answer to a difficult problem and is better than out of range accesses or worse writes.
TextureArray.Sample float
When using ‘Sample’ on a TextureArray, CUDA treats the array index parameter as an int, even though it is passed as a float.
Separate Sampler
This feature means that a multiple Samplers can be used with a Texture. In terms of the HLSL code this can be seen as the ‘SamplerState’ being a parameter passed to the ‘Sample’ method on a texture object.
On CUDA the SamplerState is ignored, because on this target a ‘texture object’ is the Texture and Sampler combination.
Graphics Pipeline
CPU and CUDA only currently support compute shaders.
Ray Tracing DXR 1.0
Vulkan does not support a local root signature, but there is the concept of a ‘shader record’. In Slang a single constant buffer can be marked as a shader record with the [[vk::shader_record]] attribute, for example:
[[vk::shader_record]]
cbuffer ShaderRecord
{
uint shaderRecordID;
}
In practice to write shader code that works across D3D12 and VK you should have a single constant buffer marked as ‘shader record’ for VK and then on D3D that constant buffer should be bound in the local root signature on D3D.
tex.Load
tex.Load is only supported on CUDA for Texture1D. Additionally CUDA only allows such access for linear memory, meaning the bound texture can also not have mip maps. Load is allowed on RWTexture types of other dimensions including 1D on CUDA.
Full bool
Means fully featured bool support. CUDA has issues around bool because there isn’t a vector bool type built in. Currently bool aliases to an int vector type.
On CPU there are some issues in so far as bool’s size is not well defined in size an alignment. Most C++ compilers now use a byte to represent a bool. In the past it has been backed by an int on some compilers.
[unroll]
The unroll attribute allows for unrolling for loops. At the moment the feature is dependent on downstream compiler support which is mixed. In the longer term the intention is for Slang to contain it’s own loop unroller - and therefore not be dependent on the feature on downstream compilers.
On C++ this attribute becomes SLANG_UNROLL which is defined in the prelude. This can be predefined if there is a suitable mechanism, if there isn’t a definition SLANG_UNROLL will be an empty definition.
On GLSL and VK targets loop unrolling uses the GL_EXT_control_flow_attributes extension.
Slang does have a cross target mechanism to unroll loops, in the section Compile-Time For Statement.
Atomics on RWBuffer
For VK the GLSL output from Slang seems plausible, but VK binding fails in tests harness.
On CUDA RWBuffer becomes CUsurfObject, which is a ‘texture’ type and does not support atomics.
On the CPU atomics are not supported, but will be in the future.
Sampler Feedback
The HLSL sampler feedback feature is available for DirectX12. The features requires shader model 6.5 and therefore a version of DXC that supports that model or higher. The Shader Model 6.5 requirement also means only DXIL binary format is supported.
There doesn’t not appear to be a similar feature available in Vulkan yet, but when it is available support should be addeed.
For CPU targets there is the IFeedbackTexture interface that requires an implemention for use. Slang does not currently include CPU implementations for texture types.
RWByteAddressBuffer Atomic
The additional supported methods on RWByteAddressBuffer are…
void RWByteAddressBuffer::InterlockedAddF32(uint byteAddress, float valueToAdd, out float originalValue);
void RWByteAddressBuffer::InterlockedAddF32(uint byteAddress, float valueToAdd);
void RWByteAddressBuffer::InterlockedAddI64(uint byteAddress, int64_t valueToAdd, out int64_t originalValue);
void RWByteAddressBuffer::InterlockedAddI64(uint byteAddress, int64_t valueToAdd);
void RWByteAddressBuffer::InterlockedCompareExchangeU64(uint byteAddress, uint64_t compareValue, uint64_t value, out uint64_t outOriginalValue);
uint64_t RWByteAddressBuffer::InterlockedExchangeU64(uint byteAddress, uint64_t value);
uint64_t RWByteAddressBuffer::InterlockedMaxU64(uint byteAddress, uint64_t value);
uint64_t RWByteAddressBuffer::InterlockedMinU64(uint byteAddress, uint64_t value);
uint64_t RWByteAddressBuffer::InterlockedAndU64(uint byteAddress, uint64_t value);
uint64_t RWByteAddressBuffer::InterlockedOrU64(uint byteAddress, uint64_t value);
uint64_t RWByteAddressBuffer::InterlockedXorU64(uint byteAddress, uint64_t value);
On HLSL based targets this functionality is achieved using NVAPI. Support for NVAPI is described in the separate NVAPI Support document.
On Vulkan, for float the GL_EXT_shader_atomic_float extension is required. For int64 the GL_EXT_shader_atomic_int64 extension is required.
CUDA requires SM6.0 or higher for int64 support.
Mesh Shader
There is preliminary Mesh Shader support.
Shader Execution Reordering
More information about Shader Execution Reordering.
Currently support is available in D3D12 via NVAPI, and for Vulkan via the GL_NV_shader_invocation_reorder extension.
Debug Break
Slang has preliminary support for debugBreak() intrinsic. With the appropriate tooling, when debugBreak is hit it will cause execution to halt and display in the attached debugger.
Currently this is supported in all targets except HLSL. Note that on some targets if there isn’t an appropriate debugging environment the debugBreak might cause execution to fail or potentially it is ignored.
On C++ targets debugBreak is implemented using SLANG_BREAKPOINT defined in “slang-cpp-prelude.h”. If there isn’t a suitable intrinsic, this will default to attempting to write to nullptr leading to a crash.
Some additional details:
- If slang-llvm is being used as the downstream compiler (as is typical with
host-callable), it will crash into the debugger, but may not produce a usable stack trace. - For “normal” C++ downstream compilers such as Clang/Gcc/Visual Studio, to break into readable source code, debug information is typically necessary. Disabling optimizations may be useful to break on the appropriate specific line, and have variables inspectable.
Realtime Clock
Realtime clock support is available via the API
// Get low 32 bits of realtime clock
uint getRealtimeClockLow();
// Get 64 bit realtime clock, with low bits in .x and high bits in .y
uint2 getRealtimeClock();
On D3D this is supported through NVAPI via NvGetSpecial.
On Vulkan this is supported via VK_KHR_shader_clock extension
On CUDA this is supported via clock.
Currently this is not supported on CPU, although this will potentially be added in the future.